Highway Reflective Traffic Paint TCVN 8791-2011 Hot Melt Reflective
Marking Paint
Description
Main Ingredient:C5 Petropols, EVA, PE wax, titanium dioxide, filler materials.
Application
Hot melt reflective marking paint is mainly used for more than 2
level of the highway and highway, the marking coating thickness of
this paint is (1.0 ~ 2.5) mm, the paint is mixed with reflective
glass beads, and in the marking construction, the surface of the
reflective glass beads. This marking has good night reflective
performance, long service life, according to the traffic flow of
large highway construction of all kinds of road marking paint
demand estimates, small and the quality of the paint itself,
generally up to (2 ~ 3) years. The construction of hot melt coating
requires special heating equipment. For the second recoating of the
old marking line, the thicker old coating should be removed before
coating.
Technical Specification
Density(g/cm3) | 1.8-2.3 |
| Softening point (℃) | 90-125 |
| Compressive Strength(MPa) | ≥12 |
| Glass bead content(%) | 0-30% |
| Liquidity | 35±10 |
| Packing | 25kg/bag |
| Color | White/Yellow/Blue/Red/Green/Customized |
| Executive standard | JT/T280-2004/AASHTO/BS3262/Customized |
| Appearance | Powder |
| Construction temperature | 180℃-220℃ |
| Whiteness | 70-85(Customized) |
| Inverse coefficient | 50-550 |
| Warranty | 12 months |
| Storage Method | Avoid light and moisture |
| Packing Size | 45×70×5CM |
Product Advantage:
1. Higher adhesive strength: Special elastomer is added in our
recipe of thermoplastic road marking paint in order to improve the
adhesive strength.
2. Stronger crack resistance: Our recipe compounded a special
additive which is seasoned with the temperature.Thus it avoids
possible deformation of the melted film caused by nature
temperature variation.
3. Bright color: Our recipe introduced high quality color filler
with reasonable mixture proportion. And it helps thermoplastic
paint lasts for years without color change.
4. Enhanced wet night visibility.
5. Immediate retroreflectivity.
Application of Thermoplastic Road Marking Paint
1. Industrial Areas:
Thermoplastic road markings are used in industrial zones for safety
and traffic management purposes.
2. Parking Lots:
Parking spaces, directional arrows, and pedestrian crossings in parking lots are often marked using thermoplastic paint.
3. Roads and Highways:
Thermoplastic markings are used for lane demarcation, edge lines,
and center lines on roads and highways.
4. Airports:
Airports use thermoplastic markings for runway and taxiway guidance
due to the material’s durability and reflective properties.
