High Quality Pavement Road Line Thickness Detector Testing Film
Thickness Gauge Measurement Digital
Description
The marking thickness measuring instrument is specially designed
and produced for production, quality supervision, engineering
construction, supervision and other units to measure the marking
thickness. The instrument has the characteristics of reasonable
structure design, simple operation, wide applicability, high
measurement accuracy, and is mainly used to measure the thickness
of pavement marking after being put into use.
The thickness detector of the marking conforms to the relevant
measurement requirements for the thickness of the completed marking
in the national standard GB/T Quality Requirements and Test Methods
for Road Traffic Marking.
Scope of application
1. Applicable to all types of road signs including or excluding
reflection rays.
2. A high-precision measuring instrument that can quickly measure
the coating thickness of road signs and similar coatings.
3. Digital display, clear and readable.
4. It can be measured directly on the road site or in the
laboratory.
5. It is applicable to national transportation departments, highway
laboratories and road sign manufacturers.
Features
1. Unique precision wire gauge and digital display for rapid
determination of dry film thickness of road signs and similar
coatings.
2. It can be measured relative to the substrate or the mark itself.
3. The digital display provides reliable measurement results in
seconds.
4. Easy to operate.
5. Robust structure and ergonomic design.
Main Parameters
| Measurement Items | Thickness of road markings |
| Measuring range | -12.7mm-12.7mm |
| Resolution ratio | 0.01mm |
| Accuracy | 0.02mm |
| Overall volume | 180mm×70mm×76mm |
| Net weight | 1.2kg |
Compliant with Specifications:
EN13197; EN13212
Simple Operation Steps:
1. Start up: Press the ON/OFF button to start up.
2. Zero calibration: Put the instrument on the smooth surface,
press the measuring head downward until can't down; meanwhile press
the zero setting and the screen will be displayed to 0.00. If not
displayed to 0.00, the up steps can be tried several times until
the screen appears to 0.00MM and the value is adjusted to 0.00MM.
3. Test: The screen appears 0.00MM, which means the zero
calibration is succeed. Put the measuring head on the marking line
and then press down the measuring head until can't be pressed down;
the value displayed on the screen is the thickness of the marking
line.
