Environmentally Friendly BS 3262 Hot Melt Road Marking Paint for High-Performance Markings

Product Description

BS 3262 Hot Melt Road Marking Paint is a British Standard specification for thermoplastic road marking materials designed to provide durable, highly visible, and long-lasting road markings. This standard ensures that the hot melt road marking paint meets specific requirements for performance, safety, and environmental considerations.

Composition:

• Thermoplastic Resins: The paint is made from a blend of thermoplastic resins, which allow it to be melted and applied in a molten state. When it cools, it solidifies into a durable, hard surface.
• Pigments: Typically includes titanium dioxide for white markings and lead-free yellow pigments, ensuring bright, high-visibility colors.
• Glass Beads: Retro-reflective glass beads are embedded in the paint to enhance visibility, especially at night or under low light conditions.
• Fillers: Materials like calcium carbonate or silica are used to adjust the paint's texture and improve its wear resistance.

Applications:

• Highway and Road Markings: Lane lines, arrows, and edge lines.
• Pedestrian Crosswalks: Enhancing visibility for pedestrian safety.
• Parking Lot Markings: Used for demarcating spaces in parking lots and garages.
• Symbols and Signs: Road symbols like stop lines and directional arrows.

Performance Features:

• Adheres well to asphalt and concrete surfaces.
• Offers vibrant and fade-resistant colors (white and yellow are standard).
• Long-lasting retro-reflectivity enhances safety for drivers at night.
• Resistant to cracking, chipping, and peeling.

Advantages:

• Longevity: Offers a long-lasting solution for road markings.
• High Visibility: Provides clear, reflective markings that improve safety for drivers.
• Cost-Effective: Despite the initial investment in materials and equipment, the durability and low maintenance needs of BS 3262 hot melt paint make it cost-effective in the long term.

Detailed Process of Hot Melt Road Marking Paint Construction

1. Road Cleaning

Before operation, the nearby area must be cleaned to ensure that there are no impurities such as oil, water, fallen leaves, weeds, ect., so as not to affect the adhesion effect, flatness and reflection effect of the line.

2. Set the Point and Mark Line

In the process of sampling, the calculation and measurement must be carried out in strict accordance with the construction drawings. Measure the several lanes that need to be drawn on the road, set the point, and then mark it with a stone pen. Use titanium dioxide powder to glue the rope for the elastic line. After the rope is removed, it will be corrected and improved to ensure that the line shape is clear and accurate.

3. Apply the Primer

The lower coating is a common binder in hot melt marking construction. It is applied to the highway road surface, which can make the hot melt coating better adhere to the road surface.

4. Spray the Paint

Before construction, first check the relevant coating equipment. Then heat the paint.

When the trolley moves forward, the paint will form a coating film on the road, and a layer of glass beads should be sprinkled on the coating film during the coating process.

When the trolley moves forward, take the reference line as the ruler, control the thickness and width of the line, and ensure the coordination, clarity and smoothness of the line connection between the straight line and the curve.

Note: During the coating process, in order to avoid the sedimentation and separation of the paint, it is necessary to stir the paint frequently.

5. Check and Correct

After the coating is completed, check and correct the line shape, check the spread of glass beads, etc.

After confirming that it is correct, the construction site will be cleaned up.

After the line is dried and hardened, the relevant construction equipment can be transferred, the safety facilities can be dismantled, and the traffic can be opened.

Technical Specification

         Guangdong Hua Qun Traffic Facilities Co., Ltd. By Shares was found in 2 0 1 0, there are two factories located in Guangzhou and Zhanjiang, Guangdong province. Hua Qun registered capital of 13.66million R M B, and has its own import and export right.

         Hua Qun is a professional manufacturer in road safety product for over 10 years, specializing in thermoplastic paint, glass beads,road marking mchine with competitive price,have cooperated with more than 100 government projects. We also provide product design and solutions for road construction projects at home and abroad. We have complete construction equipment, excellent construction technology and rich construction experience and all of our traffic safety equipments are strictly in accordance with research and test center and exported to worldwide market. Provide O E M and O D M service. In addition, we have passed I S O 9 0 0 1, certifications issued by S D I C.

          Our sales network covers all over the world, and we have exported to the Middle East, Southeast Asia, Africa,South America, and we are finding Exclusive Agency from all over the world for our products.

         We insist quality and service is all in the business, innovation and researching are service and quality. Plenty of customers prove we are right.

           We warmly welcome to visit our factory, and look forward to your sincere cooperation.