Reflective Thermoplastic Traffic Road Paint Parking Lots Airports
Driveways Pavement Marking Material Coating Powder Liquid
Product Description
Thermoplastic pavement marking material is a type of traffic paint
used for road markings, such as lane lines, pedestrian crossings,
and other highway symbols. It's made from a combination of resins,
pigments, and glass beads, and it is applied to the pavement in a
molten state, where it hardens quickly upon cooling to form a
durable, long-lasting marking.
Here are some key characteristics of thermoplastic pavement
markings:
1. Durability: Thermoplastic markings are highly resistant to wear from traffic,
weather, and other environmental factors, making them suitable for
high-traffic areas.
2. Retroreflectivity: The glass beads embedded in the material help enhance the
visibility of the markings, especially at night or in low-light
conditions, by reflecting headlights from vehicles.
3. Application: The material is applied hot, at temperatures typically between
375°F and 400°F (190°C to 204°C). It can be applied using
specialized equipment that melts the material and spreads it on the
road surface.
4. Fast Setting: Once applied, thermoplastic markings cool and harden quickly,
allowing roads to be reopened to traffic soon after the markings
are made.
5. Types: There are different types of thermoplastic materials based on the
specific needs of the application, including standard, thick-film,
and preformed thermoplastic markings.
Thermoplastic pavement markings are commonly used for highway,
roadway, and airport applications due to their durability,
visibility, and resistance to fading.
Usage:
- Clean the surface to be coated thoroughly.
- Ensure the surface is dry and free from contaminants.
- Apply the thermoplastic coating using appropriate application
methods such as spraying or brushing.
- Heat the coating to the required temperature to ensure proper
adhesion and curing.
How to Thermoplastic Pavement Marking Paint?
Here are the general steps to use thermoplastic pavement marking
paint:
Preparation
- Gather equipment: You'll need a hot melt paint applicator such as
a hot melt paint machine or a hot - glue - like gun that can heat
the paint to its melting point. Also, prepare a clean container for
the paint if it doesn't come pre - packaged for the applicator, and
safety gear like heat - resistant gloves.
- Surface preparation: Make sure the surface you're going to apply
the paint on is clean, dry, and free of debris, grease, or other
substances that could prevent the paint from adhering properly. For
example, if you're using it for road markings, sweep the road
surface thoroughly.
Application
- Load the paint: Put the hot melt paint into the applicator's
reservoir according to the manufacturer's instructions.
- Heat the paint: Turn on the applicator and wait for the paint to
melt. The time it takes to melt depends on the type and amount of
paint and the power of the applicator.
- Apply the paint: Once the paint is in a liquid state, carefully
apply it to the desired surface. If it's for road markings, you can
use a nozzle to dispense the paint in a continuous line or in
specific patterns. For other applications like product labeling,
apply the paint precisely where you want the label or marking to
be.
Cooling and setting
- Allow to cool: After application, let the hot melt paint cool and
solidify. This usually happens quickly, but the exact time depends
on the ambient temperature and the thickness of the paint layer. Do
not touch or disturb the painted area during this time to ensure a
smooth and even finish.
| Customized Formula |
| Customized Formula | Content(Customized range) | Characteristics |
| C5 Resin | 10%-22% | Fluidity Toughness Hardness Adhesion |
| Titanium Dioxide | 0.5-10% | 0.5%-30% |
| Premixed glass beads | 0%-30% | Reflective after surface wear |
| Calcium Carbonate Sand | 30%-80% | Whiteness Wear-resistant Hardness |
| PE Wax | 1%-1.5% | Cold and heat resistant |
| EVA | 0.5%-1% | Crack resistance |
| Plasticizer | 1%-1.5% | Toughness |
Advantages of Thermoplastic Pavement Marking Paint
The advantages of thermoplastic paint are as follows:
Strong adhesion and durability
- It has strong adhesion to the road surface, ensuring that the
marking lines remain intact, clear, and not easily peeled off under
the long-term influence of vehicle rolling and various
environmental factors.
- It has excellent wear resistance and a long service life,
reducing the waste of manpower and material resources caused by
repeated constructions and the obstruction to normal traffic.
Good visibility
- Reflective glass beads can be mixed during construction, so the
marking lines have good reflective performance at night, which can
greatly improve the safety and efficiency of driving at night and
make it easier for drivers to see the road markings clearly under
low-light conditions.
- The color of the paint itself is bright and eye-catching,
providing clear guidance for drivers and pedestrians even during
the day.
Rapid drying and convenient construction
- It dries quickly and can be opened to traffic shortly after
construction, effectively reducing the impact on traffic and
improving construction efficiency.
- The construction method is relatively simple. Usually, a special
marking device is used to scrape or spray the melted paint on the
road surface, which is easy to operate and can form neat and
uniform marking lines.
Economy
- Although its initial purchase cost may be relatively high, due to
its long service life, it has good cost-effectiveness in the long
run and can reduce the maintenance and re-marking costs of road
markings.
Environmental adaptability and maintainability
- It has good weather resistance and water resistance, can adapt to
various harsh natural environments, maintain vividness for a long
time, and is not easy to fade or be damaged due to natural aging,
rain washing, and other factors.
- The later maintenance is relatively easy. If the marking lines
need to be modified or removed, the paint can be softened by
heating and then processed.
Technical Specification
| Density(g/cm3) | 1.8-2.3 |
| Softening point (℃) | 90-125 |
| Compressive Strength(MPa) | ≥12 |
| Glass bead content(%) | 0-30% |
| Liquidity | 35±10 |
| Packing | 25kg/bag |
| Color | White/Yellow/Blue/Red/Green/Customized |
| Executive standard | JT/T280-2004/AASHTO/BS3262/Customized |
| Appearance | Powder |
| Construction temperature | 180℃-220℃ |
| Whiteness | 70-85(Customized) |
| Inverse coefficient | 50-550 |
| Warranty | 12 months |
| Storage Method | Avoid light and moisture |
| Packing Size | 45×70×5CM |
