Versatile Thermoplastic Paint for Advanced Traffic Facility
Solutions
Thermoplastic Paint:
Thermoplastic material that is solid at room temperature. It can be
heated to a molten state and then applied to a surface. Upon
cooling and solidifying, it forms a durable coating.
Product Description
Key Features
1. Durability: This hot melt coating exhibits excellent resistance
to abrasion, weathering, and traffic wear. It can maintain its
integrity and visibility under heavy use and harsh environmental
conditions. Whether it's facing scorching sun, freezing cold, or
continuous vehicle passage, our coating will stay intact for a long
time.
2. Visibility: With a high - quality pigment system, our coating
offers vivid colors that provide clear visual guidance. The coating
has good retro - reflectivity, ensuring excellent visibility both
during the day and at night. It effectively enhances safety on
roads, parking lots, and other traffic - related areas.
3. Quick - Drying: Once applied, our hot melt coating dries
rapidly. This enables a fast return to normal use of the treated
surface, minimizing disruption to traffic or other activities.
4. Strong Adhesion: It has a remarkable ability to adhere firmly to
a wide variety of surfaces such as asphalt and concrete. This
strong bond ensures that the coating remains in place without
peeling or flaking.
5. Environment - Friendly: Our hot melt coating is produced with an
emphasis on environmental protection. It contains low levels of
volatile organic compounds (VOCs), reducing its impact on air
quality and the environment.
Application Method of Thermoplastic Paint:
1. Surface Preparation: Clean the surface to be coated thoroughly.
Remove dirt, dust, grease, and any loose materials. Make sure the
surface is dry and smooth for better adhesion.
2. Pre - heat the Equipment: Pre - heat the hot - melt coating
equipment, such as the melting kettle or spray gun, to the
appropriate temperature according to the product instructions. This
temperature is usually within a specific range to ensure the proper
melting of the coating material.
3. Melt the Coating: Pour the hot - melt coating material into the
pre - heated equipment and allow it to melt completely. Stir gently
if necessary to ensure uniform melting.
4. Application:
- For spraying: Adjust the spray gun settings according to the
required thickness and width of the coating. Hold the spray gun at
a proper distance from the surface and spray evenly. Overlap each
pass slightly to ensure complete coverage.
- For pouring or spreading: Pour the melted coating onto the
surface and use a suitable tool, like a squeegee or trowel, to
spread it evenly to the desired thickness. Work quickly as the
coating will start to solidify once it cools.
5. Curing: Allow the applied hot - melt coating to cool and
solidify naturally. Do not touch or disturb the coating during this
process to ensure it forms a proper and durable layer.
It is important to follow the specific instructions provided by the
manufacturer of the hot - melt coating product for the best
results.
Specification
| Density (g/cm3) | 1.8-2.3 |
| Softening point(℃) | 90-125 |
| Compressive strength(MPa) | ≥12 |
| Glass bead content(%) | 0-30%(Customized) |
| Liquidity | 35±10 |
| Packing | 25kg/bag±0.2 |
| Color | White/Yellow/Blue/Green/Customized |
| Executive standard | JT/T280-2004/AASHTO/BS3262/Customized |
| Appearance | Powder |
| Construction temperature | 180℃-220℃ |
| Whiteness | 70-85(Customized) |
| Inverse coefficient | 50-550 |
| Warranty | 365days |
| Storage Method | Avoid light and moisture |
| Packing size | 45×70×5cm |
