Manufacturing Line Traffic road marking paint 25 kg Road sign paint
coating reflective hot melt thermoplastic marking paint
Product Description
Thermoplastic marking paint are coatings that become soft and
flowable when heated and harden again when cooled.
Definition: Thermoplastic paint are a type of coating material that
is characterized by its ability to soften and flow under heat and
then solidify upon cooling.
Specifications:
- Varying colors available.
- Different thicknesses can be applied depending on the specific
requirements.
- Good weather resistance.
Usage:
- Clean the surface to be coated thoroughly.
- Ensure the surface is dry and free from contaminants.
- Apply the thermoplastic coating using appropriate application
methods such as spraying or brushing.
- Heat the coating to the required temperature to ensure proper
adhesion and curing.
How to Use Thermoplastic Paint?
Thermoplastic road marking paint is mainly used for road markings.
Here's a general way to use it:
1. Surface preparation:
- The surface to be painted should be clean, dry, and free of dust,
oil, and loose debris. Sweep or use a blower to remove loose
particles. If there is grease or other contaminants, clean the
surface with an appropriate solvent.
2. Melting the paint:
- Thermoplastic paint needs to be heated to a molten state. This is
usually done using a specialized thermoplastic paint melting
kettle. The paint is heated to a temperature typically between 180
- 220 degrees Celsius (the exact temperature may vary depending on
the product specifications) until it becomes a smooth, fluid
consistency.
3. Application:
- The molten paint can be applied using a squeegee or a spray
application system. For road markings like lane lines, crosswalks,
etc., the squeegee is a common tool. The operator pours the molten
paint in front of the squeegee and then drags it along the marked
path to create a smooth, even line of the desired width. When using
a spray system, make sure the spray nozzle is adjusted to achieve
the correct pattern and thickness.
4. Drying and curing:
- After application, the thermoplastic paint cools and solidifies.
This process doesn't take long, usually within a few minutes, as
the paint hardens to form a durable marking. It's important to keep
the area free from traffic or other disturbances during this
initial drying and curing period to ensure the markings set
properly.
It's crucial to follow the manufacturer's instructions carefully
when using thermoplastic paint, as different products may have
specific requirements regarding temperature, application methods,
and safety precautions.
| Customized Formula |
| Customized Formula | Content(Customized range) | Characteristics |
| C5 Resin | 10%-22% | Fluidity Toughness Hardness Adhesion |
| Titanium Dioxide | 0.5-10% | 0.5%-30% |
| Premixed glass beads | 0%-30% | Reflective after surface wear |
| Calcium Carbonate Sand | 30%-80% | Whiteness Wear-resistant Hardness |
| PE Wax | 1%-1.5% | Cold and heat resistant |
| EVA | 0.5%-1% | Crack resistance |
| Plasticizer | 1%-1.5% | Toughness |
Advantages of Thermoplastic Paint
The advantages of thermoplastic paint are as follows:
Strong adhesion and durability
- It has strong adhesion to the road surface, ensuring that the
marking lines remain intact, clear, and not easily peeled off under
the long-term influence of vehicle rolling and various
environmental factors.
- It has excellent wear resistance and a long service life,
reducing the waste of manpower and material resources caused by
repeated constructions and the obstruction to normal traffic.
Good visibility
- Reflective glass beads can be mixed during construction, so the
marking lines have good reflective performance at night, which can
greatly improve the safety and efficiency of driving at night and
make it easier for drivers to see the road markings clearly under
low-light conditions.
- The color of the paint itself is bright and eye-catching,
providing clear guidance for drivers and pedestrians even during
the day.
Rapid drying and convenient construction
- It dries quickly and can be opened to traffic shortly after
construction, effectively reducing the impact on traffic and
improving construction efficiency.
- The construction method is relatively simple. Usually, a special
marking device is used to scrape or spray the melted paint on the
road surface, which is easy to operate and can form neat and
uniform marking lines.
Economy
- Although its initial purchase cost may be relatively high, due to
its long service life, it has good cost-effectiveness in the long
run and can reduce the maintenance and re-marking costs of road
markings.
Environmental adaptability and maintainability
- It has good weather resistance and water resistance, can adapt to
various harsh natural environments, maintain vividness for a long
time, and is not easy to fade or be damaged due to natural aging,
rain washing, and other factors.
- The later maintenance is relatively easy. If the marking lines
need to be modified or removed, the paint can be softened by
heating and then processed.
Technical Specification
| Density(g/cm3) | 1.8-2.3 |
| Softening point (℃) | 90-125 |
| Compressive Strength(MPa) | ≥12 |
| Glass bead content(%) | 0-30% |
| Liquidity | 35±10 |
| Packing | 25kg/bag |
| Color | White/Yellow/Blue/Red/Green/Customized |
| Executive standard | JT/T280-2004/AASHTO/BS3262/Customized |
| Appearance | Powder |
| Construction temperature | 180℃-220℃ |
| Whiteness | 70-85(Customized) |
| Inverse coefficient | 50-550 |
| Warranty | 12 months |
| Storage Method | Avoid light and moisture |
| Packing Size | 45×70×5CM |
Company Profile
