High Reflective Performance Thermoplastic Road Marking Paint Yellow
and White or Customized
Description
Thermoplastic road marking paint formulation , also known as hot
melt road marking paint, is a type of paint specifically designed
for use in road marking applications. It is commonly used to create
visible and durable road markings for traffic guidance and safety
purposes.
Hot melt road marking paint is composed of a mixture of
thermoplastic resin, pigments, fillers, and additives. The paint is
heated to a molten state and applied to the road surface, where it
quickly solidifies and adheres to the pavement.
Technical Specification
Density(g/cm3) | 1.8-2.3 |
| Softening point (℃) | 90-125 |
| Compressive Strength(MPa) | ≥12 |
| Glass bead content(%) | 0-30% |
| Liquidity | 35±10 |
| Packing | 25kg/bag |
| Color | White/Yellow/Blue/Red/Green/Customized |
| Executive standard | JT/T280-2004/AASHTO/BS3262/Customized |
| Appearance | Powder |
| Construction temperature | 180℃-220℃ |
| Whiteness | 70-85(Customized) |
| Inverse coefficient | 50-550 |
| Warranty | 12 months |
| Storage Method | Avoid light and moisture |
| Packing Size | 45×70×5CM |
Main Components and Features
1. Titanium dioxide: Good whiteness, high purity, small particle
size, low oil absorption
2. C5 resin: Outstanding affinity for pigments, good compatibility
with EVA, good heat stability
3. PE wax: Heat resistance, abrasion resistance, as a lubricant,
increase paint processing performance.
4. Calcium carbonate: High precise classification, high whiteness
5. Glass beads: Drop on glass beads, intermix glass bead, we use
top brand beads brand, high reflective.
Formula Customized
| Customized Formula |
| Customized Formula | Content(Customized range) | Characteristics |
| C5 Resin | 10%-22% | Fluidity Toughness Hardness Adhesion |
| Titanium Dioxide | 0.5-10% | 0.5%-30% |
| Premixed glass beads | 0%-30% | Reflective after surface wear |
| Calcium Carbonate Sand | 30%-80% | Whiteness Wear-resistant Hardness |
| PE Wax | 1%-1.5% | Cold and heat resistant |
| EVA | 0.5%-1% | Crack resistance |
| Plasticizer | 1%-1.5% | Toughness |
